MacroJunior
… gives extreme flexibility
… one chuck, two systems
… reduces setting-up times.
… ensures precision and quality
… is suitable for automatic changing with System 3R’s automation program.
- Clamping force – 5000 N
- Fixed index positions Macro 4x90° and MacroJunior 3x120°
- Required air pressure, pneumatic chuck – 6±1 bar
- Recommended tightening torque, manual chuck – 4 Nm
39 results for 'MacroJunior'
3R-465-LE
For round electrodes Ø4-8 mm or square < 8x18 mm, and with maximum height 30 mm.
3R-446.11
For mounting in the Macro system. Side locking of the MacroJunior holder. Duct for flushing through the electrode.
3R-466.4033
For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode.
3R-466.4033-S
For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.
3R-466.10033
For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.
3R-466.15033
For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.
3R-410.31-5
Chuck in High Performance version. Five ground surfaces for vertical or horizontal mounting on the machine table.
3R-410.1-M
For mounting on the machine spindle or in a fixture on the machine table.
3R-460.34
For mounting in the machine spindle by means of 3R-A11489, or on the machine table by means of 3R-A19724 or alternatively 3R-A21944, or in a fixture.