Tooling for EDM

3R-600.23-S

Cast chuck with mounting flange for mounting on the machine spindle or in a fixture.

3R-SP15055

Cast chuck with ground flange for installation in fixture/plate.

3R-600.24-S

Cast chuck with ground back face for mounting on the machine spindle with 3R-A11489 or in a fixture on the machine table.

3R-600.24RS

Rust resistant manual chuck designed for permanent mounting.

3R-600.28-S

Cast chuck with ground back face for mounting on the machine spindle. Also suitable in a fixture on the machine table or with adapterplate 3R-A26488.

3R-903-20-30

Bushes of hardened spring steel 54 HRC. Outside diameter 30 mm

3R-903-20-315

Bushes of hardened spring steel 54 HRC. Outside diameter 31.5 mm

3R-903-20-40

Bushes of hardened spring steel 54 HRC. Outside diameter 40 mm

3R-903-20-414

Bushes of hardened spring steel 54 HRC. Outside diameter 41.4 mm

3R-903-20-42

Bushes of hardened spring steel 54 HRC. Outside diameter 42 mm

3R-903-20-4445

Bushes of hardened spring steel 54 HRC. Outside diameter 44.45 mm

3R-902-10E

Hardened steel, 60 HRC, for mounting in existing fixtures.