Tooling for EDM

3R-651.7E-N

Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.

3R-651E-N

Hardened with clearance holes for four fixing screws.

3R-601.1E-N

Hardened with clearance holes for four fixing screws.

3R-651.75E-N

Hardened and precision-cast with clearance holes for eight fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.

3R-601.7-N

Hardened and precision-cast, with clearance holes for four fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.

3R-606-N

Control ruler with ground C-reference for setting MacroNano chucks.

3R-606.1-N

For setting angular positions and for centring MacroNano chucks.

3R-600.23-S

Cast chuck with mounting flange for mounting on the machine spindle or in a fixture.

3R-SP15055

Cast chuck with ground flange for installation in fixture/plate.

3R-600.24-S

Cast chuck with ground back face for mounting on the machine spindle with 3R-A11489 or in a fixture on the machine table.

3R-600.24RS

Rust resistant manual chuck designed for permanent mounting.

3R-600.28-S

Cast chuck with ground back face for mounting on the machine spindle. Also suitable in a fixture on the machine table or with adapterplate 3R-A26488.