Tooling for wire EDM

3R-262HP

For mounting SuperVice, a holder or a fixture in the Macro system. Note: All holders including HP can be mounted.

3R-266.4

For manual mounting of SuperVice, a holder or a fixture in the Macro system. Note: All holders including HP can be mounted.

3R-266.5

For mounting SuperVice, a holder or a fixture in the Macro system. Note: All holders including HP can be mounted.

3R-282.12HP

For mounting Magnum holders in the MacroTwin system. Note: All holders including HP can be mounted.

3R-266.12HP

For manual mounting of Magnum holders in the MacroTwin system. Note: All holders including HP can be mounted

3R-228J

Stone with three ground faces, a reference element and a clearance stone. Together with a surface plate and a dial indicator, 3R-228J is an excellent presetting tool for a modest outlay.

3R-228U

Mounting stone with bushings and holes for mounting chuck/reference elements. Use together with existing measuring machine or surface plate and a dial indicator.

C457940

For mounting ICS holders in WEDM, Macro and MacroTwin mounting heads.

C457960

For mounting ICS holders in WEDM, Macro and MacroTwin mounting heads.

3R-206.10

Control ruler for horizontal Macro chucks. One long side ground to the Macro references. Supplied with engraved dimensions in the X-, Y- and Z-directions.

3R-220.3

Unit with double-insulated reference contacts for wire alignment.

3R-243.2-1

Set enabling vertical adjustment of Macro chuck.