15 results for MacroJunior

MacroJunior

… gives extreme flexibility
… one chuck, two systems
… reduces setting-up times.
… ensures precision and quality
… is suitable for automatic changing with System 3R’s automation program.

Clamping force – 5000 N
Fixed index positions Macro 4x90° and MacroJunior 3x120°
Required air pressure, pneumatic chuck – 6±1 bar
Recommended tightening torque, manual chuck – 4 Nm

15 results for 'MacroJunior'

« 1 2 »

For setting angular positions and for centring.

Control ruler, MacroJunior

3R-406.11

For setting angular positions and for centring.

Control rod, MacroJunior

3R-406.23

Control rod with ground C-reference.

For machines with measurement cycle function.

Measuring probe, MacroJunior

3R-US400.3

For machines with measurement cycle function.

Measuring probe, MacroJunior

3R-US400.5

For machines with measurement cycle function.

For screws 3R-PI4.5x20E and 3R-PI4.5x25E.

Torx screwdriver, MacroJunior

3R-333-T20

For screws 3R-PI4.5x20E and 3R-PI4.5x25E.

Manual chuck, MacroJunior

3R-400.24-11

For mounting on machine spindle.

Used in combination with 3R-491E when electrode blanks are mounted with adhesive and screws*. Permits mounting in MacroCombi chucks.

Plate 5.5 mm, MacroJunior

3R-SP19270

Used in combination with 3R-491E when electrode blanks are mounted with adhesive and screws*. Permits mounting in MacroCombi chucks.

Used in combination with 3R-491E when soldering round (<50 mm) or square (<40 mm) copper blanks. Permits mounting in MacroCombi chucks.

Plate 10 mm, MacroJunior

3R-SP19269

Used in combination with 3R-491E when soldering round (<50 mm) or square (<40 mm) copper blanks. Permits mounting in MacroCombi chucks.

Upper and lower faces ground parallel within 0.002 mm. Locating pin Ø8.8 mm (0/0.05 mm).

Holder 25 mm, MacroJunior

3R-461-8.8-HP

Upper and lower faces ground parallel within 0.002 mm. Locating pin Ø8.8 mm (0/0.05 mm).

The taper is machined suitably for attaching very small electrodes. To be mounted on 3R-491E with three screws MFT4x12.

Holder with taper, MacroJunior

3R-465.1E-A

The taper is machined suitably for attaching very small electrodes. To be mounted on 3R-491E with three screws MFT4x12.

Collet chuck ETS10, MacroJunior

3R-469-10

Chuck for collets ETS10.

Collet chuck ER16, MacroJunior

3R-469-16

Chuck for collets ER16.

« 1 2 »