Tooling for EDM

3R-903-20.254

Bushes of hardened spring steel 54 HRC. Outside diameter 25.4 mm

3R-903-20-26

Bushes of hardened spring steel 54 HRC. Outside diameter 26 mm

C810830

Unit for controlling pneumatic chucks C 219 100.

C810850

Unit to control two pneumatic chucks.

C810810

Unit for controlling pneumatic chucks C 219 600.

S220000

Contains all elements for a normal service.

C219007

The chuck seal is a wear part which should be replaced every three to six months.

3R-321.2-4x90°

Hydraulic chuck with set screws, for mounting on a lathe taper.

3R-321.46

Manual hydraulic chuck for vertical or horizontal mounting on the machine table.

3R-463/5033

For mounting MacroJunior holders in the Mini system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.

3R-1.321-HS

Electric spindle for tubular electrodes in collets ER16.

3R-322/25S

Holder with hardened reference part and unhardened electrode mounting part.