Tooling for EDM

3R-A19724

For mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on machine table. Note: Chuck to be ordered separately.

3R-SSP115-Jun

Added kit to enable checking MacroJunior chucks.

3R-611.46

Unit for operation of pneumatic chucks. Three positions – open/neutral/closed.

3R-469-16

Chuck for collets ER16.

3R-469-10

Chuck for collets ETS10.

3R-406.23

Control rod with ground C-reference.

3R-406.11

For setting angular positions and for centring.

3R-605.14E

3R-405.16E

Drawbar Ø15 mm to mount Macro holders in chucks 3R-460.XX.

3R-461-8.8-HP

Upper and lower faces ground parallel within 0.002 mm. Locating pin Ø8.8 mm (0/0.05 mm).

3R-465.1E-A

The taper is machined suitably for attaching very small electrodes. To be mounted on 3R-491E with three screws MFT4x12.

3R-465-LE

For round electrodes Ø4-8 mm or square < 8x18 mm, and with maximum height 30 mm.