Tooling for wire EDM

3R-WP1

Enables automatic changing of 3R-206.10, 3R-208.6, 3R-266.5, 3R-622.6 or customer-made fixtures.

3R-239-XXX

The rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability.

3R-239.1

Movable jaws of SuperVice design provide a wide clamping range for rectangular workpieces. Detachable Z-support tabs ensure simple setting-up.

3R-239-XXX-D

Double-sided rulers are available in various lengths (-XXX), to match different machines. The cross-section is matched to the length to ensure optimal stability. With these rulers, accessories can be clamped on both sides of the ruler.

3R-A239

Clamps of aluminium for mounting a ruler directly on the machine table without reference elements.

3R-203

Hydraulic locking of set position. Note: For angle setting, 3R-216 is recommended.

3R-201J

Basic element for 3D accessories.

3R-204

Can be turned upwards or downwards when mounting on 3R-201J.

3R-223

Used where vertical or horizontal displacement of workpiece or accessory is necessary.

3R-203.66

Swivelling element with manual Macro chuck to be mounted onto a Macro chuck. Mecanical locking of the set position. Vernier scale for quick setting in 0.1-degree steps. Note: For angle setting sine ruler 3R-216.6 and gauge block are recommended.

3R-223.3

Used where vertical or horizontal displacement of workpiece or accessory is necessary.

90937

Swivelling element with manual Macro chuck to be mounted onto leveling heads. Mecanical locking of the set position. Vernier scale for quick setting in 0.1-degree steps. Note: For angle setting sine ruler 3R-216.6 and gauge block are recommended.