Tooling for EDM
397 results for 'Tooling for EDM'
3R-TXXXX
Taper attachment for mounting chucks in taper spindles. Note: Manufactured on request. State machine type, taper (1), drawbar thread (2) and which 3R chuck is to be mounted.
3R-A21944
For vertical or horizontal mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on the machine table. Intended for milling. Note: Chuck to be ordered separately.
3R-A19724
For mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on machine table. Note: Chuck to be ordered separately.
3R-321.2-4x90°
Hydraulic chuck with set screws, for mounting on a lathe taper.
3R-321.46
Manual hydraulic chuck for vertical or horizontal mounting on the machine table.
3R-463/5033
For mounting MacroJunior holders in the Mini system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.
3R-322/25S
Holder with hardened reference part and unhardened electrode mounting part.
3R-310EE
Holder with hardened reference part Ø20 mm and unhardened flange Ø50 mm.
3R-322/100
Holder with hardened reference part and unhardened electrode mounting part.
3R-13.321
Holder with hardened reference part Ø20 mm for mounting square and flat electrodes.