Tooling for EDM
397 results for 'Tooling for EDM'
3R-695.2-220
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
3R-695.2-260
Note: In automation the gripper has to grip on the pallet and not on the drawbar.
3R-494-D22x50
Blanks mounted on MacroJunior holders for the manufacture of electrodes. The stock range is matched to local preferences and ways of working. This applies to electrode materials, different grades of graphite and copper, and to dimensions. Contact your local 3R representative for further information. The System 3R factory can supply holders with factory-mounted copper blanks in sets of ten.
![Cast aluminium pallet. Suitable for high-speed milling and arduous milling operations.](https://apiecat.gfms.com/medias/S-500-160.jpg?context=bWFzdGVyfGltYWdlc3wzNjcxODZ8aW1hZ2UvanBlZ3xhRE0wTDJnMk9TODRPREE0TVRVM01ESXdNVGt3TDFNZ05UQXdJREUyTUM1cWNHY3w5ZWU5NmZjYWJhZDQ4MWE0N2Q1YWVkMWEyMzc0NzU2ODEyYzc5MDU5MjQ4N2IxYTE0ZmExYmZmZjQ1NDYyOGM0)
S500160
Cast aluminium pallet. Suitable for high-speed milling and arduous milling operations.
![Cast aluminium pallet. Suitable for high-speed milling and arduous milling operations.](https://apiecat.gfms.com/medias/S-500-170.jpg?context=bWFzdGVyfGltYWdlc3wzNjcxODZ8aW1hZ2UvanBlZ3xhR1JrTDJnMk9DODRPREE0TVRVM01EVXlPVFU0TDFNZ05UQXdJREUzTUM1cWNHY3w0NzgxMzFmYmE2ZjRmNDM0ZDcyMDFjZjQzYjQ4ZjhiOGM0ZjY2OThlMmY0NWIwODJkZGFjMGY5ZDNkMzlmMTAy)
S500170
Cast aluminium pallet. Suitable for high-speed milling and arduous milling operations.
C522800
Chuck adapter with built-in pneumatic GPS120 chuck for mounting in: C219800 for automated pallet change GPS120. C219000, C219100, C219110, C219200 for manual pallet change GPS120; Open/Close GPS120 with air gun.
3R-936-60.38
Reference tables of structurally-stable toughened steel (270-320 HB). Hardened bushes in dead-end holes for 3Refix mandrels Ø20 mm at 100x100 mm modular spacing, as well as M12 tapped mounting holes with 50x50 mm modular spacing. Note: Customised reference tables can be made to order. Note: Hardened reference tables (650-700 HB) can be made to order.
3R-901-10RS
Note: When positioning with 3Refix mandrels –always tighten the expanding mandrel in the R0 hole first.