Tooling for EDM
397 results for 'Tooling for EDM'
Rotating spindle, Macro
3R-6.600-VHS
For clamping in a horizontal or vertical Macro chuck. Flushing via the spindle or an external flushing connection.
![Holder with hardened reference part and unhardened electrode mounting part.](https://apiecat.gfms.com/medias/3R-322-50E.jpg?context=bWFzdGVyfGltYWdlc3w5NzIzNnxpbWFnZS9qcGVnfGFEbGhMMmcxWXk4NE9EQTRNVFUwTVRBek9ETTRMek5TTFRNeU1sODFNRVV1YW5Cbnw3MDU2N2E5MzE0NjMxOTkwMDljOGU2ZTc1NzJhMTk0ZWE5NjdlZDZmMWQ0NWU3Y2ZlMjYwODNkOWVlYTRhNGU0)
Electrode holder Ø20 mm, Mini
3R-322/50E
Holder with hardened reference part and unhardened electrode mounting part.
Holder 25 mm, MacroJunior
3R-461-8.8-HP
Upper and lower faces ground parallel within 0.002 mm. Locating pin Ø8.8 mm (0/0.05 mm).
Holder with taper, MacroJunior
3R-465.1E-A
The taper is machined suitably for attaching very small electrodes. To be mounted on 3R-491E with three screws MFT4x12.