Tooling for EDM
397 results for 'Tooling for EDM'
3R-600.24-4RS
Rust resistant chuck for Macro holder. Mounts on a suitable fixture.
![Holder with hardened reference part and unhardened electrode mounting part.](https://apiecat.gfms.com/medias/3R-322-50E.jpg?context=bWFzdGVyfGltYWdlc3w5NzIzNnxpbWFnZS9qcGVnfGFEbGhMMmcxWXk4NE9EQTRNVFUwTVRBek9ETTRMek5TTFRNeU1sODFNRVV1YW5Cbnw3MDU2N2E5MzE0NjMxOTkwMDljOGU2ZTc1NzJhMTk0ZWE5NjdlZDZmMWQ0NWU3Y2ZlMjYwODNkOWVlYTRhNGU0)
3R-322/50E
Holder with hardened reference part and unhardened electrode mounting part.
3R-SP28340
Chuck for permanent mounting in the machine table or into a PM press.
3R-6.600-VHS
For clamping in a horizontal or vertical Macro chuck. Flushing via the spindle or an external flushing connection.
3R-652.9
For horizontal mounting of Macro holders. Supplied with drawbar for screw locking.
3R-406.9
For horizontal mounting of MacroJunior holders in the Macro system. Screw locking.
3R-681.71
Hardened reference element with clearance holes for fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
![Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.](https://apiecat.gfms.com/medias/3R-SP18286.jpg?context=bWFzdGVyfGltYWdlc3w4MzY0MTN8aW1hZ2UvanBlZ3xhR1EzTDJoa05DODRPREE0TVRVMU5UYzRNems0THpOU0xWTlFNVGd5T0RZdWFuQm58ODkzZTA2MmEyNjYwM2EzNmZlOTY0ZmMzNWVmYjEyZmNjMzYwMmUzZDM4Y2MwNTM1NGJhNjY2ZmVkZTY5ODc5Nw)
3R-SP18286
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.
![Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.](https://apiecat.gfms.com/medias/3R-SP19047.jpg?context=bWFzdGVyfGltYWdlc3wzNTIzODV8aW1hZ2UvanBlZ3xhRGd3TDJoa05DODRPREE0TVRVMU5UUTFOak13THpOU0xWTlFNVGt3TkRjdWFuQm58ZTAzNWFiYjM1NDhkODdhNmI2NGFkNzI4OWM2MTBkMDliZjAyYzFiZDY2ZWRlNzNkMzUzNzFkZDgzZmZjOTY2MQ)
3R-SP19047
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.