Tooling for EDM
397 results for 'Tooling for EDM'
3R-321-4x90º
Hydraulic chuck for mounting on machine spindle with Midi system.
3R-321.2-4x90°
Hydraulic chuck with set screws, for mounting on a lathe taper.
3R-321.46
Manual hydraulic chuck for vertical or horizontal mounting on the machine table.
3R-463/5033
For mounting MacroJunior holders in the Mini system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.
3R-322/25S
Holder with hardened reference part and unhardened electrode mounting part.
3R-310EE
Holder with hardened reference part Ø20 mm and unhardened flange Ø50 mm.
3R-681.71
Hardened reference element with clearance holes for fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
3R-322/100
Holder with hardened reference part and unhardened electrode mounting part.
3R-13.321
Holder with hardened reference part Ø20 mm for mounting square and flat electrodes.