Macro
… reduces setting-up times.
… ensures precision and quality.
… has automatic air-blast cleaning of the references in the pneumatic chucks.
… has higher locking force in the pneumatic chucks – turbo locking.
… has references of cemented carbide or hardened ground steel.
… is suitable for automatic changing with System 3R’s automation program.
- Repetition accuracy:
- MacroNano – within 0.001 mm
- Macro (Std and HP) – within 0.002 mm
- Locking force – 6000 N
- Fixed index positions – 4x90°
- Required air pressure, pneumatic chuck – 6±1 bar
- Recommended tightening torque, manual chuck – 6 Nm
- Recommended max workpiece weight – 50 kg.
![](https://apiecat.gfms.com/medias/Macro.jpg?context=bWFzdGVyfGltYWdlc3wxNzc4NDZ8aW1hZ2UvanBlZ3xhR00zTDJnNVlpODRPREk0TnprMU9ERXpPVEU0TDAxaFkzSnZMbXB3Wnd8YWU2NjZmNjQyZmZiNjA2NWI3MTQxMDA0NDE5ZWZjMWUyN2U3M2YzMjQ1MGNmMzEwMDk3ZTY2MTVkMjliNGVkMA)
137 results for 'Macro'
D-20173
Manual chuck for permanent mounting in spindle of powder press machine.
3R-651.75-50E
Hardened and milled with clearance holes for eight fixing screws. Note: Must be mounted on the workpiece/fixture before it is locked in a chuck.
90238
Fixture for punch on Macro, in order to wire-cut a through hole within Ø20 mm.
3R-SSP122
Intended for checking clamping force of Matrix chucks and for those Macro chucks found in compacting machines (due to cramped and limited space inside machine). In order to check Matrix chucks, see additional converter kits 3R-SSP115MATRIX nnn enabling checking.
90909
Alignment and control tool for the Macro + 3Refix system in PM. Alignment is rough but helps reduce assembly time before final verification and alignment with verification tools. Also to be used to check parallelism between punch levels versus die-plate-level.
3R-600.24-4RS
Rust resistant chuck for Macro holder. Mounts on a suitable fixture.
3R-6.600-VHS
For clamping in a horizontal or vertical Macro chuck. Flushing via the spindle or an external flushing connection.