Tooling for EDM
397 results for 'Tooling for EDM'
3R-600.24-4RS
Rust resistant chuck for Macro holder. Mounts on a suitable fixture.
3R-6.600-VHS
For clamping in a horizontal or vertical Macro chuck. Flushing via the spindle or an external flushing connection.
3R-460.83-2
Pneumatic chuck for mounting directly on the machine spindle. All XYZ-references in hardened and ground steel. Note: When ordering state machine make and type.;
3R-410.31-5
Chuck in High Performance version. Five ground surfaces for vertical or horizontal mounting on the machine table.
3R-SP19143
Stainless steel chuck with ground flange Ø22x6 mm for mounting in a fixture or the WEDM system. Axial locking screw with channel for flushing through the electrode.
3R-652.9
For horizontal mounting of Macro holders. Supplied with drawbar for screw locking.
3R-SP18286
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.
3R-SP19047
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.
3R-467.9-1
For horizontal mounting of MacroJunior holders. Screw locking. Note: For EDM machining only..
3R-491E
For copper or graphite electrodes. NOTE: The electrode is installed with screw and adhesive assembly, or alternatively brazing.