Tooling for wire EDM
144 results for 'Tooling for wire EDM'
3R-239.24
For clamping thin workpieces. To be fitted together with zero-line support tab.
3R-223
Used where vertical or horizontal displacement of workpiece or accessory is necessary.
3R-223.3
Used where vertical or horizontal displacement of workpiece or accessory is necessary.
90937
Swivelling element with manual Macro chuck to be mounted onto leveling heads. Mecanical locking of the set position. Vernier scale for quick setting in 0.1-degree steps. Note: For angle setting sine ruler 3R-216.6 and gauge block are recommended.
3R-228J
Stone with three ground faces, a reference element and a clearance stone. Together with a surface plate and a dial indicator, 3R-228J is an excellent presetting tool for a modest outlay.
3R-226.6
For horizontal clamping SuperVice and holders in vertical Macro chucks.
3R-228E
Mounting stone with bushings and holes for mounting chuck/reference elements. Use together with existing measuring machine or surface plate.
3R-201.5
Mounts directly on the machine table. For vertical mounting of a Macro chuck or short reference element in the machine.
3R-60.360X
Compact Rotary Indexing Tables with pneumatic Macro chuck. Indexing 0-360° with smallest step 0.001°. Air connections for open/close, as well as turbo-locking/air-blast cleaning. Note: The units are controlled by the machine.The mark and type of the machine must therefore be stated when ordering.