Tooling for wire EDM
144 results for 'Tooling for wire EDM'
3R-200.1J-U
Universal 150 mm reference element, with oval holes, for all machines that have M8 holes in the machine table, 30 to 40 mm from the edge of the table.
3R-200.XJ-X
Reference elements for machines with zero-line table. The length (L), hole spacing (C) and hole edge spacing (B) of the hardened reference elements are matched to the machine in question. Note: When ordering, state machine mark and type.
3R-602.27-1
Chuck adapter with lever for Macro holder in the WEDM system. Note: When mounted on the reference element, the two clamping jaws must be tightened with the same torque, 4 Nm.
3R-422.2
Chuck adapter with axial locking screw for MacroJunior holders in the WEDM system.
3R-466.40RS
Chuck adapter, stainless steel, for MacroJunior holders in the Macro system. Axial locking screw.
3R-252.1
Chuck adapter with dual hydraulic chambers for Mini holders in the WEDM-system.
3R-202
Manual chuck with dual hydraulic chambers for Mini holders. Vertical or horizontal mounting in the WEDM system.
3R-222.2
Chuck adapter with dual hydraulic chambers for Mini holders in the WEDM-system.
3R-272HP
For manual mounting of SuperVice, a holder or a fixture in the WEDM system. Note: All holders including HP can be mounted. Also fits the ICS system if the clamping jaw (17850-00) is changed.