Tooling for wire EDM
144 results for 'Tooling for wire EDM'
3R-266.12HP
For manual mounting of Magnum holders in the MacroTwin system. Note: All holders including HP can be mounted
3R-228J
Stone with three ground faces, a reference element and a clearance stone. Together with a surface plate and a dial indicator, 3R-228J is an excellent presetting tool for a modest outlay.
3R-228U
Mounting stone with bushings and holes for mounting chuck/reference elements. Use together with existing measuring machine or surface plate and a dial indicator.
3R-228E
Mounting stone with bushings and holes for mounting chuck/reference elements. Use together with existing measuring machine or surface plate.
3R-228.1
Surface plate with reference stops, a mounting stone with bushings and holes for mounting a chuck/reference element and through holes for mounting on the surface plate, and a check stone. A dial indicator is required.
3R-239.24
For clamping thin workpieces. To be fitted together with zero-line support tab.
3R-A239
Clamps of aluminium for mounting a ruler directly on the machine table without reference elements.
3R-203
Hydraulic locking of set position. Note: For angle setting, 3R-216 is recommended.