Tooling for powder compacting

3R-692.7-220

Handle to circumvent pallet for easier lift off chuck.

3R-692.8-142

In combination with 3R-692.7-110 and 3R-692.7-142 to enable lift by crane.

3R-692.8-220

In combination with 3R-692.7-185 and 3R-692.7-220 to enable lift by crane.

D-20158-BASE

This fixture enables adjustment of punches within metal powder compacting by Macro system. The fixture is a stand-alone unit. It is possible to replace the indicators with electrical sensors. Free access from underneath, to access fixation-screws for the pallets.

90909

Alignment and control tool for the Macro + 3Refix system in PM. Alignment is rough but helps reduce assembly time before final verification and alignment with verification tools. Also to be used to check parallelism between punch levels versus die-plate-level.

D-20198-DZxx

Requires computer etc by D-20189-BASE. To be used in combination with punch unit D-20198-Zxx.

D-20198-ZXX

Tool to establish Z-distance in combination with either 3Refix or Matrix 142 pallet. This unit requires additional tool. It is possible to apply electrical or mechanical indicators while measuring top surface. Note: Linear probe is not included.

3R-600.17-30

Pneumatic chuck for permanent mounting in spindle of powder press machine.

90803.50

Pneumatic chuck for permanent mounting in spindle of powder press.

3R-600.27-30

Manual chuck for permanent mounting in spindle of powder press machine.

3R-A34249

For manual Macro chuck, i.e. 3R-600.27-XX

D-20175

Pneumatic chuck for core rod.