MacroJunior
… gives extreme flexibility
… one chuck, two systems
… reduces setting-up times.
… ensures precision and quality
… is suitable for automatic changing with System 3R’s automation program.
- Clamping force – 5000 N
- Fixed index positions Macro 4x90° and MacroJunior 3x120°
- Required air pressure, pneumatic chuck – 6±1 bar
- Recommended tightening torque, manual chuck – 4 Nm
39 results for 'MacroJunior'
90356.21
Chuck adapter with built-in pneumatic MacroCombi chuck for mounting in 3R-770-1A or 3R-770-5A.
3R-410.31-5
Chuck in High Performance version. Five ground surfaces for vertical or horizontal mounting on the machine table.
3R-410.1-M
For mounting on the machine spindle or in a fixture on the machine table.
3R-460.34
For mounting in the machine spindle by means of 3R-A11489, or on the machine table by means of 3R-A19724 or alternatively 3R-A21944, or in a fixture.
3R-460.31-5
Chuck in HighPerformance version. Five ground surfaces for vertical or horizontal mounting on the machine table.
3R-SP18286
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.
3R-SP19047
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.
3R-SP19270
Used in combination with 3R-491E when electrode blanks are mounted with adhesive and screws*. Permits mounting in MacroCombi chucks.
3R-SP19269
Used in combination with 3R-491E when soldering round (<50 mm) or square (<40 mm) copper blanks. Permits mounting in MacroCombi chucks.