Mini

The Mini system provides rapid and exact mounting of the electrode holders in hydraulic quick-change chucks. This high change accuracy is achieved thanks to the two chambers of the hydraulic system, which expand uniformly and provide symmetrical locking against the fixed Z reference with angular location.

Clamping force – 4000 N.

18 results for 'Mini'

Manual hydraulic chuck for vertical or horizontal mounting on the machine table.

Manual chuck, MiniBlock, Mini

3R-321.46

Manual hydraulic chuck for vertical or horizontal mounting on the machine table.

Electric spindle for tubular electrodes in collets ER16.

Rotating spindle, Mini

3R-1.321-HS

Electric spindle for tubular electrodes in collets ER16.

Holder with hardened reference part Ø20 mm for mounting square and flat electrodes.

Electrode holder, Mini

3R-13.321

Holder with hardened reference part Ø20 mm for mounting square and flat electrodes.

Chuck Ø20 mm for Ø0.3-3 mm electrodes.

Three-jaw chuck, Mini

3R-311.4

Chuck Ø20 mm for Ø0.3-3 mm electrodes.

Chuck Ø20 mm for collets ER20 with electrodes < Ø13 mm.

Collet chuck ER20, Mini

3R-311.2

Chuck Ø20 mm for collets ER20 with electrodes < Ø13 mm.

Chuck Ø20 mm for collets ER16 with electrodes < Ø10 mm.

Collet chuck ER16, Mini

3R-311.3

Chuck Ø20 mm for collets ER16 with electrodes < Ø10 mm.

Ground C-reference.

Control ruler, Mini

3R-23

Ground C-reference.

For soldering electrode blanks on Mini holders.

Soldering kit, Mini

3R-403

For soldering electrode blanks on Mini holders.

For horizontal mounting of Mini holders in the Macro system.

Manual chuck adapter 90°, Macro-Mini

3R-603.9

For horizontal mounting of Mini holders in the Macro system.

For mounting Mini holders in the Macro system.

Manual chuck adapter, Macro-Mini

3R-653-S

For mounting Mini holders in the Macro system.

Intended to fit cut tools with Ø20 mm. Also adapted to fit System 3R Mini electrode holders with Ø20 mm.

Manual chuck adapter, Matrix110-Ø20

3R-SP31380-RS

Intended to fit cut tools with Ø20 mm. Also adapted to fit System 3R Mini electrode holders with Ø20 mm.

Hydraulic chuck for mounting on machine spindle with 3R-A3620.

Manual chuck, Mini

3R-321.5

Hydraulic chuck for mounting on machine spindle with 3R-A3620.