Tooling for EDM

3R-404-25

For soldering electrode blanks on 3R-491E or 3R-SP19269.

3R-468.31-S

Starter set for electrode manufacturing.

90027.02

Intended for MacroCombi chucks. Can also be used as a cover for unused chucks.

3R-A21944

For vertical or horizontal mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on the machine table. Intended for milling. Note: Chuck to be ordered separately.

3R-A19724

For mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on machine table. Note: Chuck to be ordered separately.

3R-611.46

Unit for operation of pneumatic chucks. Three positions – open/neutral/closed.

3R-321.5

Hydraulic chuck for mounting on machine spindle with 3R-A3620.

3R-321-4x90º

Hydraulic chuck for mounting on machine spindle with Midi system.

3R-321.2-4x90°

Hydraulic chuck with set screws, for mounting on a lathe taper.

3R-321.46

Manual hydraulic chuck for vertical or horizontal mounting on the machine table.

3R-463/5033

For mounting MacroJunior holders in the Mini system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.

3R-1.321-HS

Electric spindle for tubular electrodes in collets ER16.