Tooling for wire EDM

3R-239.20

Kit for clamping rectangular, round or thin workpieces.

3R-239.11

Movable jaws for mounting two rectangular workpieces at the same time. Detachable Z-support tabs ensure simple setting-up.

3R-294.6

For mounting four workpieces Ø5-13 mm at the same time. Mounts on 3R-237.2, 3R-294, 3R-292.66HP or a ruler in the 3Ruler system.

3R-261.1

For mounting directly on the machine table.

3R-239.25

Support bracket. For 3Ruler.

3R-228U

Mounting stone with bushings and holes for mounting chuck/reference elements. Use together with existing measuring machine or surface plate and a dial indicator.

3R-228E

Mounting stone with bushings and holes for mounting chuck/reference elements. Use together with existing measuring machine or surface plate.

3R-228.1

Surface plate with reference stops, a mounting stone with bushings and holes for mounting a chuck/reference element and through holes for mounting on the surface plate, and a check stone. A dial indicator is required.

3R-216.6

For setting angles on swivelling elements. Angles are set with gauge blocks.

3R-242S-3

Levelling unit with universal vice.

3R-242S-4

3R-680.24RS

Chuck for MacroMagnum holder. For permanent mounting on the machine spindle or table. Note: Master 3R-606.1 or 3R-686.1-HD required at installation.