Tooling for EDM
397 results for 'Tooling for EDM'
![For horizontal mounting of MacroJunior holders. Screw locking.
Note: For EDM machining only..](https://apiecat.gfms.com/medias/3R-467.9-1.jpg?context=bWFzdGVyfGltYWdlc3w1NjM2MDh8aW1hZ2UvanBlZ3xhRGN3TDJnMk5DODRPREE0TVRVME16azROelV3THpOU0xUUTJOeTQ1TFRFdWFuQm58MzYyODQzODUwMzhlNGIxNDJjZDY2Zjk5ZTU0YjYxMmU3NjcxOWVmZDg3MDAxMGIzNDk4ZTc4MjNjY2RhYmJmOA)
3R-467.9-1
For horizontal mounting of MacroJunior holders. Screw locking. Note: For EDM machining only..
3R-491E
For copper or graphite electrodes. NOTE: The electrode is installed with screw and adhesive assembly, or alternatively brazing.
3R-491E-HP
Top and bottom faces parallel-ground to within 0.002 mm. NOTE: The electrode is installed with screw and adhesive assembly, or alternatively brazing.
3R-461.1E-GA
Holder with journal , 3R-461.1E-GA Journal Ø10x10 mm. Intended mainly for graphite electrodes. To be mounted on 3R-491E with three MFT4x12 screws and adhesive.
3R-SP19270
Used in combination with 3R-491E when electrode blanks are mounted with adhesive and screws*. Permits mounting in MacroCombi chucks.
3R-465.1E-A
The taper is machined suitably for attaching very small electrodes. To be mounted on 3R-491E with three screws MFT4x12.
3R-600.24-4RS
Rust resistant chuck for Macro holder. Mounts on a suitable fixture.
![Intended for MacroCombi chucks. Can also be used as a cover for unused chucks.](https://apiecat.gfms.com/medias/90027.02.jpg?context=bWFzdGVyfGltYWdlc3wyOTY0NDZ8aW1hZ2UvanBlZ3xhR0k0TDJoa1pTODRPREE0TVRVMU9EUXdOVFF5THprd01ESTNMakF5TG1wd1p3fDQ3OGJkN2VmYTRmODIxZTM2NDYzOTM5MjJkODIyZDAyMDFlZTViZmI0MDU2OGRjZjZmYmQ2NzFjMTk1NmI1ODM)
90027.02
Intended for MacroCombi chucks. Can also be used as a cover for unused chucks.
3R-863.25-10
With pre-programmed unique identity, designed for MacroJunior 25 mm, 3R-491E.