MacroJunior
… gives extreme flexibility
… one chuck, two systems
… reduces setting-up times.
… ensures precision and quality
… is suitable for automatic changing with System 3R’s automation program.
- Clamping force – 5000 N
- Fixed index positions Macro 4x90° and MacroJunior 3x120°
- Required air pressure, pneumatic chuck – 6±1 bar
- Recommended tightening torque, manual chuck – 4 Nm
39 results for 'MacroJunior'
90356.21
Chuck adapter with built-in pneumatic MacroCombi chuck for mounting in 3R-770-1A or 3R-770-5A.
3R-SP19270
Used in combination with 3R-491E when electrode blanks are mounted with adhesive and screws*. Permits mounting in MacroCombi chucks.
3R-SP19269
Used in combination with 3R-491E when soldering round (<50 mm) or square (<40 mm) copper blanks. Permits mounting in MacroCombi chucks.
3R-461-8.8-HP
Upper and lower faces ground parallel within 0.002 mm. Locating pin Ø8.8 mm (0/0.05 mm).
90027.02
Intended for MacroCombi chucks. Can also be used as a cover for unused chucks.
3R-A19724
For mounting of 3R-400.34, 3R-460.34 and 3R-600.24-S on machine table. Note: Chuck to be ordered separately.
3R-446.11
For mounting in the Macro system. Side locking of the MacroJunior holder. Duct for flushing through the electrode.
3R-466.4033
For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode.
3R-466.4033-S
For mounting in the Macro system. Axial locking screw with channel for flushing through the electrode. Note: For EDM machining only.