Tooling for EDM
397 results for 'Tooling for EDM'
![Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.](https://apiecat.gfms.com/medias/3R-SP19047.jpg?context=bWFzdGVyfGltYWdlc3wzNTIzODV8aW1hZ2UvanBlZ3xhRGd3TDJoa05DODRPREE0TVRVMU5UUTFOak13THpOU0xWTlFNVGt3TkRjdWFuQm58ZTAzNWFiYjM1NDhkODdhNmI2NGFkNzI4OWM2MTBkMDliZjAyYzFiZDY2ZWRlNzNkMzUzNzFkZDgzZmZjOTY2MQ)
3R-SP19047
Pneumatic chuck for building-in, for example in a fixture, dividing head or B-axis.
![For horizontal mounting of MacroJunior holders. Screw locking.
Note: For EDM machining only..](https://apiecat.gfms.com/medias/3R-467.9-1.jpg?context=bWFzdGVyfGltYWdlc3w1NjM2MDh8aW1hZ2UvanBlZ3xhRGN3TDJnMk5DODRPREE0TVRVME16azROelV3THpOU0xUUTJOeTQ1TFRFdWFuQm58MzYyODQzODUwMzhlNGIxNDJjZDY2Zjk5ZTU0YjYxMmU3NjcxOWVmZDg3MDAxMGIzNDk4ZTc4MjNjY2RhYmJmOA)
3R-467.9-1
For horizontal mounting of MacroJunior holders. Screw locking. Note: For EDM machining only..
3R-491E
For copper or graphite electrodes. NOTE: The electrode is installed with screw and adhesive assembly, or alternatively brazing.
3R-491E-HP
Top and bottom faces parallel-ground to within 0.002 mm. NOTE: The electrode is installed with screw and adhesive assembly, or alternatively brazing.
3R-461.1E-GA
Holder with journal , 3R-461.1E-GA Journal Ø10x10 mm. Intended mainly for graphite electrodes. To be mounted on 3R-491E with three MFT4x12 screws and adhesive.
3R-SP19270
Used in combination with 3R-491E when electrode blanks are mounted with adhesive and screws*. Permits mounting in MacroCombi chucks.
3R-SP19269
Used in combination with 3R-491E when soldering round (<50 mm) or square (<40 mm) copper blanks. Permits mounting in MacroCombi chucks.
3R-461-8.8-HP
Upper and lower faces ground parallel within 0.002 mm. Locating pin Ø8.8 mm (0/0.05 mm).
3R-465.1E-A
The taper is machined suitably for attaching very small electrodes. To be mounted on 3R-491E with three screws MFT4x12.
3R-465-LE
For round electrodes Ø4-8 mm or square < 8x18 mm, and with maximum height 30 mm.